General Tool List

1. Metal Tool Box with at least one tray; non-metal tool box is optional
2. Digital Multi-meter an analog meter is optional (NOTE: Do not purchase until Block 2)
3. Calculator – a basic model is recommended
4. All Pliers – Diagonal, duck billed, needle nosed, slip joint and water pump
5. 1/4″ Shallow Socket Drive Set with 12-point sockets from 1/4″ to 9/16″ by 16th” increments, including 11/32″ and 1/4″ Drive extensions – 6″ and 10″ Speed handles
6. 3/8″ Shallow Socket Drive Set with 12 point sockets from 3/8″ to 1″ and 3/8″ drive extensions – 6″ and 10″
7. Combination open end/box end wrench set from 1/4″ to 1″. Duplicates are recommended in the 7/16″, 1/2″, and 9/16″ sizes, including 11/32″
8. Straight slot (common) and Phillips Head screwdrivers-Long & short shaft
9. Phillips #1, #2, #3 screwdrivers, stub and regular lengths
10. Slotted #1, #2, #3 screwdrivers stub and regular lengths
11. Pick set, straight, hooked, angled, right angle
12. Speed handle – 1/4″ drive
13. #1, #2 Easy out screw extractor or kit: Extractor T handle for extractors
14. Drills – 5/32″ and 7/64″
15. Plastic faced Mallet
16. Ball peen hammer – not over 8 oz.
17. Pin punches, drifts- 3/32″ and 1/8″ pin punch, center punch, and a 1/4″ brass drift
18. Cold Chisel
19. Thickness or feeler gauges
20. Pencil Compass
21. Steel combination square – with 45 and 90 degree angles + 15″ or 18″ ruler
22. Files – medium cut for metal use 8″ half round, 8″ mill, 8″ round, and a handle
23. Vernier Caliper – digital optional
24. 0 to 1″ outside micrometer – digital optional
25. One tap and one die holder with 10/32 tap and die, 8/32, and 6/32
26. Steel rule – 1/64″ increments, 6″ length
27. Scissors – not over 6″
28. Utility knife
29. “Exacto” knife
30. Flashlight
31. Inspection Mirror
32. Hex key or Allen wrench set
33. Hacksaw frame and blades 4 each 24 & 32 teeth per inch
34. Magnifying Glass – at least 10X
35. Safety Equipment – Safety Glasses, dust masks, welding goggles and gloves, earplugs and latex gloves
36. School ID Card
37. Protractor

Total: $600.00 – Cost is estimated. Actual cost may vary.